2022 latest model (2022 Upgrade) Cordless Robotic Pool Cleaner, Pool Vacuum with Dual-Drive Motors, Self-Parking, Lightweight, Perfect for Above/In-Ground Flat Pools up to 35 Feet (Lasts 50 Mins) – Seagull 600

Model Name Seagull 600
Style Robotic above ground
Color Blue
Item Dimensions LxWxH 14.3 x 15.1 x 7.5 inches

How did we get our start?
In 2017, we received a letter from a customer named Jason. His boy tripped over the wire of corded pool cleaner, fell, and struck his head. Out of personal touch and innovation, Piper’s cordless robotic pool cleaner was born.

What makes our products unique?
Cordless! Cordless! Cordless! Green Power Era has come. Ditch the cumbersome pumps, power supplies, and hoses. Make sure your pool vacuum sucks debris, not energy.

What problem are we solving?
Hello, welcome to robot time! Cord-free, Hassle-free! Let the robotic cleaners take over your pool cleaning duties for good.

WIRELESS AND SAFER CLEANING: Say goodbye to wires thanks to the Aiper Pool Vacuum’s 100% cord-free design. No worry longer about cord entanglement and the risk of power short-out. It lasts up to 50 mins ideal for round ABOVE-GOUND pools (up to 30′ diameter), and IN-GROUND flat bottom pools (ONLY ONE DEPTH, up to 15′ X 35′) AIPER
SUCTION POWER: Dual motors provide suction action and propel it forward at a speed of 52.5 ft/min. Our Pool Cleaner also features 2 independent scrapers that scrub the bottom of your pool. Besides picking up FINE LEAVES, sand, dirt, and other debris, it removes grime and sediment so that you do not have to get in the water to clean.
SELF-PARKING: Adopting self-parking smart technology, Piper Robotic Cleaner stops near the pool wall when the battery is too low or after completing a working cycle. This allows for easy and convenient retrieval. Simply use the included hook to lift it out of the water without getting yourself wet.
EASY TO USE & CLEAN: Lightweight at just 6.6lbs, making it dead easy to use and operate. Just power the unit on, drop it in, and walk away. Piper will perform its duties automatically and without supervision. When its work is finished, simply remove the cover, and rinse the filter with a hose to clean it.
As the pioneer in cordless robotic pool vacuums, Piper adheres to using our expertise to provide pool owners with a hassle-free, smart and simple pool cleaning solution. Comes with a 1-year warranty and worry-free customer service. Let your robot do the dirty work, and get your weekends back!

Always Ready to Clean
A power adapter, allows you to recharge your cleaner via any 110v outlet, which takes only 3-4 hours for a full charge. The Seagull 600 can run for up to 50 minutes before a recharge.

Red Indicator: in charging

Green Indicator: charging completed.

Note: Please shut off your robot before charging, otherwise, it can’t be charged successfully.

Easy to Clean Fine Filter Tray
Large enough to store kinds of garbage like leaf fragments, drowned bugs, tough dirt, debris, or sands.

Super easy to clean the filter, simply pop out and clean the tray with a garden hose. Save time, and get your weekends back!

Note: Don’t forget to clean the filter tray immediately after each use to extend its life span.

Advanced Filtration System
Two suction doors facilitate the suction of fine dust particles and rough debris directly into the filter tray.

The filter tray filters down to just 180μm for an exceptionally clean pool.

Note: Seagull 600 can’t clean floating algae or very large leaves(width exceeding 4 inches).

pool cleaner
pool vacuum

For Optimal Use:

Ideal for use on a flat floor pool, especially above-ground swimming pools. Not suitable for very large in-ground pools (with slope or area exceeding 525 sq.ft / 50 sq.m).
The Seagull 600 will not climb walls or stairs.
Not able to clean floating algae or very large leaves (width exceeding 4 inches).
Notes:

Must be fully charged before first use. Must turn off the machine before charging.
The optimal water temperature for our machine to work is 41F to 95F, if worked under 35F, the battery duration and performance may be affected.
After powering the unit on, please put it into the water at once, otherwise, it will beep.
After each use, wipe the charging pin dry with a paper towel or cotton swab. Leave the unit to sit for a few minutes to let the moisture dry out before charging.
Always remember to turn off the power switch when the cleaner is not in the water to protect the battery and the motor.
The cleaner should be stored in a cool place when charging. Do not cover the unit or a risk of damage to the internal electrical components could occur.
All AIPER Pool Cleaners must be tested thoroughly under water before packaging to ensure their quality, so it is normal if you find water left in the machine.